Street Light Poles Manufactured in South Africa
Steel street light poles built to your specification, designed to SANS 10225 and hot dip galvanised to ISO 1461. Parallel tapered designs up to 20m, fabricated in our own works and supplied across South Africa and Southern Africa.
- SANS 10225 design code
- ISO 1461 galvanising
- Coded welders, SANS 10044
- Our own works, not imported
Request a Quote
Tell us what you need and our team will provide a detailed quote tailored to your specifications.
Street Light Pole Types We Manufacture
Five pole families, each engineered for a different job, plus the rest of the range. All of it from the same steel specification, finished to the same galvanising standard.
Parallel Tapered Poles
The workhorse of municipal road lighting. The taper puts the steel where the bending load actually is, so the section is heaviest at the base and lightest at the luminaire and the pole carries its load on less steel than a parallel tube doing the same job.
Roads, streets and general area lighting
Mid-Hinged Poles
The top half swings down to ground level, so lamps are serviced without aerial lifts or heavy equipment and without anyone having to climb the pole. Servicing at ground level means reduced maintenance costs and less downtime.
Highways and hard to access sites
Octagonal Poles
Octagonal and continuously tapered, so the steel sits where the bending load is, heaviest at the base and lightest at the top, and the flat faces take a bolted fixing cleanly.
Long outreach highways
Decorative Poles
For streets where the pole is part of the picture. Custom designs, with powder coating, painting or galvanising as the finish.
Estates and precincts
Solar Poles
Panel, battery and LED on the pole itself. Light with no trenching, no cable and no connection to the grid, which is often the whole cost of the job. The taller solar mast range covers the same idea from 12m up.
Off-grid and rural sites
The Rest of the Range
Traffic, CCTV, fibre optic, telecommunication and transmission poles, side entry spigots and outreach arms for wooden and concrete poles. Above pole height the same works builds high masts and stadium masts.
Made to customer specifications
The Standard Every Street Light Pole Is Built To
Here is the specification every pole is built to, beside ENDD's own drawings, so a specifying engineer can check it before picking up the phone.
Seven standards, one pole
In the order the work happens, from the design to the handover file.
- Pole designSANS 10225
The South African design code for lighting poles, covering loading, deflection and structural behaviour.
- TubingSANS 657-1 Grade GW355J HT
A known high tensile structural grade, so the wall thickness and strength are specified rather than assumed.
- ManufacturingSANS 10214
Governs how the steel is formed and fabricated, not just what it is made of.
- WeldingSANS 10044 Parts 1 to 4
Welding by coded welders, with test certificates readily available.
- GalvanisingISO 1461 and SANS 121
Hot dip galvanising with a specified coating thickness, which is what determines service life outdoors.
- Quality systemISO 9001
A documented quality management system behind the fabrication process.
- HandoverCOC and sign-off
Certificates of Compliance and engineer sign-off in the handover file.
Made to your specification
- Height, to suit the road class and the luminaire
- Single, double or curved outreach arms
- Base plate dimensions and bolt cage layout
- Wall thickness and section to your wind zone
- Door position, earthing and cable entry
- Galvanised, powder coated or painted finish
Poles and brackets are designed and manufactured to customer specifications, and our team will provide a detailed quote tailored to yours. ENDD also does medium to heavy structural steel fabrication.
Get a QuoteWhat Buyers Say About Working With ENDD
Infrastructure, renewable energy and stadium lighting projects, in the words of the people behind them.
Exceptional Quality and Durability
"We've been sourcing street light poles and high masts from ENDD for years, and their quality is unmatched. Their products are built to last, even in harsh weather conditions. Highly recommended for any large-scale infrastructure project!"
Mark PetersenProject Manager
Reliable and Professional Service
"ENDD Lighting & Structural delivered exactly what we needed: custom-designed solar street light poles for our renewable energy project. Their team was professional, efficient, and ensured everything was compliant with industry standards."
Sarah van WykOperations Director
Engineering Excellence at Its Best
"From concept to completion, ENDD provided outstanding service and top-quality materials. Their attention to detail in manufacturing and their customer support made our stadium lighting project a success. Great Company and Team to work with"
David MokoenaSenior Engineer
A Manufacturer, Not an Importer
Plenty of companies will sell you a street light pole. Fewer of them make one. It matters most on the day something needs to change.
Buying from the works
- A height or bracket change is a fabrication decision, not a new order from overseas
- One-off and odd quantities are normal work
- Repeat batches match the first batch, years later
- Welder, galvanising and compliance certificates come from the people who did the work
- You can come and look at it on the floor in Benoni
Buying from a container
- You choose from whatever was ordered months ago
- Minimum quantities are set by the shipment, not the site
- A repeat order can come back subtly different
- Certification traces back to a factory you cannot visit
- A specification problem becomes a shipping problem
Brackets, Base Plates and Foundations
A pole is only as good as what holds it up and what holds the light out. ENDD makes the brackets and outreach arms, and designs and manufactures the foundation solutions that go with them.
Brackets and Outreach Arms
Made to the luminaire you are actually fitting, at the projection and tilt the lighting design calls for, rather than forcing the design to suit a stock bracket. The full bracket and outreach arm range is on the main site.
- Single and double outreach
- Curved and straight arms
- Floodlight brackets
- Solar panel brackets
- Decorative and heritage arms
- Spigots and adaptors
Base Plates, Bolt Cages and Foundations
The part nobody sees and everybody blames when a pole moves. Base plate, bolt cage and foundation are designed together with the pole so the load path is continuous from the luminaire into the ground. The wider foundation and bolt cage range, deep pile systems included, is on the main site.
- Reinforced concrete foundations
- Steel base plates
- Anchor bolt cages
- Deep pile foundations
- Foundations for poor ground
- Custom pile depths to match soil conditions
Built for Infrastructure, Not a Hardware Shelf
These are poles for people who buy by specification and get audited on what they installed.
- Highways and interchanges
- Municipal and township lighting
- Ports and harbours
- Airports and logistics hubs
- Industrial parks and plants
- Mines and heavy industry
- Housing estates and complexes
- Schools and sports fields
- Parking areas and forecourts
- Security and perimeter lighting
- Railway yards and sidings
- Walkways and public spaces
From Your Specification to Poles on Site
Five steps, from the first conversation to the handover file.
-
Send the specification
Contact us directly or request an online estimate, with the height and the luminaire you have in mind.
-
We design and quote
Poles are designed in accordance with SANS 10225, and our team provides a custom quote.
-
Fabrication
Cut, formed and welded in Brentwood Park by coded welders, to SANS 10214 and SANS 10044.
-
Hot dip galvanising
Galvanised to ISO 1461 and SANS 121, with certificates available, then painted if the finish calls for it.
-
Delivery and handover
Delivered to site, with installation available inside South Africa and a handover file including COCs.
Street Light Poles Across South Africa and Southern Africa
Poles leave Benoni for every province in South Africa and cross the border into the region. Bulk orders travel as flat-packed sections and assemble on site.
- South Africa, all nine provinces
- Zimbabwe
- Namibia
- Botswana
- Mozambique
- Lesotho
- Eswatini
- Wider Africa on request
To be clear about what crosses the border. Manufacture and supply reach the whole region, and installation is offered within South African borders.
Street Light Poles: Common Questions
The questions buyers ask before they request a quote. If yours is not here, phone and ask it.
What standards are your street light poles built to?
Poles are designed to SANS 10225 and manufactured to SANS 10214. Tubing is SANS 657-1 Grade GW355J HT. Welding is done by coded welders to SANS 10044 Parts 1 to 4, and galvanising is to ISO 1461 and SANS 121.
What heights do you manufacture?
Parallel tapered poles are made in various heights and diameters, and mid-hinged poles in different heights and load capacities. Tell us the height and the luminaire you need and our team will provide a custom quote.
Are the poles galvanised?
Yes. Poles are hot dip galvanised to ISO 1461 and SANS 121, and the galvanising certificates are available. Powder coating and painting are offered as finishes where the finish matters.
Can you make poles to our specification?
Yes. ENDD designs and manufactures poles and brackets to customer specifications. You can contact us directly or request an online estimate, and our team will provide a detailed quote tailored to your specifications.
Do you supply outside South Africa?
Yes. We manufacture and supply into Zimbabwe, Namibia, Botswana, Mozambique, Lesotho and Eswatini, and further into Africa on request. Installation is offered within South African borders.
Do you install the poles as well as supply them?
Within South Africa we offer turnkey delivery including civil work, erection, internal electrical installation and light aiming. Installation carried out by our own teams carries the full warranty on both product and installation.
Do you supply the brackets and foundations too?
Yes. ENDD makes brackets and outreach arms, and designs and manufactures foundation solutions including steel base plates, anchor bolt systems, concrete foundations and deep pile foundations.
What is the difference between a mid-hinged pole and a standard pole?
A mid-hinged pole has a hinge part way up so the top half swings down to ground level. Lamps are serviced at ground level without aerial lifts or heavy equipment, which is why these poles suit roadways, airports, industrial sites and remote locations.
Do you provide certificates of compliance?
Yes. Handover files include Certificates of Compliance and engineer sign-offs, and welder test certificates are readily available.
Are you a manufacturer or a reseller?
A manufacturer. ENDD Lighting & Structural designs and manufactures street light poles, high masts and industrial steel structures, and is based in Brentwood Park, Benoni.
Ready for a Quote on Your Street Light Poles?
Get in touch today with the height and the luminaire you have in mind. Our team is ready to assist you.
- lucille@endd.co.za
- 18 Van Wyk Road, Brentwood Park, Benoni, 1501, Gauteng
- South Africa, Zimbabwe, Namibia, Botswana, Mozambique, Lesotho and Eswatini